In this article, I’ll talk to you about how to make a motorcycle helmet quieter through some easy ways that are very easy and cheap.
If you are a bike user then you know that a motorcycle helmet can get very noisy.
Otherwise, overexposure to noise levels above recommended values may responsible for hearing problems.
Fortunately, there are some ways to make it easier. Read this article to learn more about the best way to make a motorcycle helmet quieter.
Ways On how to make a motorcycle helmet quieter
See below for some suggestions that I have experienced. I was surprised to know that there are some ways to reduce the noise of your motorcycle helmet. Now we are going to tell you.
Use the Right Helmet
As you know, there are many types of motorcycle helmets. Open helmets or jet helmets are undoubtedly the loudest and the least recommended due to their low degree of safety as well. The face is exposed, and although the ears are covered, the wind easily reaches them.
The modular or folding helmets are much quieter than jet helmets, but not as much as full-face helmets. In the modular ones, the face is perfectly covered and the fit with the neck is good, but the joints that remain between the mobile chin guard and the rest of the shell increase the sound of the wind when it hits the helmet.
Full-face helmets are the quietest of all. They are the ones that close the best and allow the least air to enter the interior.
Use Earplugs
Although it is very hard to make soundproof against noises, earplugs will help in this circumstance especially where you are riding at high rates.
Although you have headphones, you can use earplugs to reduce sound levels to their nominal value.
It is comfortable to use an earplug with helmets. You do need a bigger helmet to use them.
Think About the shape of the Helmet
Logically, the more aerodynamic the shape of a helmet, the less the effect of the wind on it. Everything that breaks the easy circulation of air on its surface, such as the visors of trail helmets, will produce a noise that we will not find if it were a flat and clean surface.
Taking this into account, sports helmets and touring helmets offer the least resistance to the wind, and therefore a lower noise index inside. Retro helmets, even if they are integral, are usually designed with little aerodynamic lines, so depending on the model they can be especially noisy.
Helmet vents
Every good helmet has or should have, small air inlets that allow ventilation of the head, and even many of them also offer air outlets at the back to facilitate a flow that allows us to have a ventilated head.
All these openings, both in the chin guard under the screen and the upper ones in the forehead, are sources of noise. You can check it by putting your hand on them and you will see how the sound that reaches your ears changes completely. Well-designed vents, or closed if ventilation is not necessary, will help reduce noise inside the helmet.
Wear A Scarf
It is important to realize that turbulence makes a sound that can under your bike helmet under your chin in which there is an opening.
One of the best tactics for blocking the sound created by turbulence is to wear a scarf around your neck. Make sure it melts to create long-lasting protection to reduce wind noise from your own helmet.
Among the suggested escarpments is the thermal fleece neck warmer. This elastic scarf will keep you warm on days.
Furthermore, you can use it in the sunlight when you are skiing. It is made from double-layer fabric long enough to protect the neck and face.
Screen and neck closure
The good sealing of the helmet screen on the shell is essential to reduce the sound of the wind. Any crack, no matter how small, will easily increase the noise.
In addition, the sound of the wind will also depend on the fit of the helmet with the neck, especially from the front. The mid/high-end helmets include chinstraps, generally removable, that close the helmet under our chin so that air does not enter through there and thus noise is reduced. Air that does not enter, noise that does not reach our ears.
Check The inner padding
The inner padding of the helmet is also a great concern for the noise that reaches us or does not reach our ears. From the padding that adapts to our face to the one that borders the ears.
Some helmets leave a particularly generous hole over the ear to allow the installation of intercom speakers, which leaves room for noise, and others offer removable padding if we want to gain that space.
In this sense, the size of the helmet can also influence since a helmet that is excessively large, in addition to not being safe for us, will also let more noise reach our ears. The same happens with well-used helmets and whose padding is already very given of itself.
The aerodynamics of the bike
If the noise appears when the air reaches our helmet, what is the most logical first solution?
Indeed, prevent the air from reaching the helmet, so that noise does not come to be produced and everything that we have commented previously is in a second place.
You will notice a lot of difference if you use a naked motorcycle or if you use a grand touring motorcycle or a sports motorcycle, the better the aerodynamic protection, the better our protection against the wind, the less air will reach us, and the less noise our helmet produces.
Conclusion
Now you have ways to make your motorcycle helmet quieter, some simple and inexpensive, others that require more effort. Let us know if you have any other tips!
